That jacket, suitcase or backpack may not be ruined. Replace the broken pull tab quickly—without sewing, special tools or a trip to the repair shop.
No SewingTool-Free Setup3 Useful SizesRemovable Design
✂
No Sewing Needed
Skip the needle, thread and complicated repair steps.
⚡
Fast to Attach
Clip it on, tighten the cap and start pulling.
↔
Wide Application
Made for clothing, bags, luggage and outdoor gear.
✓
Secure Grip
A screw-cap closure helps keep the clip firmly in place.
DON'T REPLACE IT—REPAIR IT
Give Everyday Favorites a Second Chance
A missing pull tab can make a perfectly good item frustrating to use. This compact replacement clips onto the existing zipper slider, creating an easy-to-grip handle so you can open and close it comfortably again.
SMALL DETAIL. BIG CONVENIENCE.
Designed for a More Comfortable Pull
Every part has a practical purpose—from the detachable clip and secure metal screw cap to the textured pull tab that is easier to hold than a tiny broken slider loop.
Secure screw-cap closure
Textured, easy-grip pull tab
Detachable clip for quick fitting
Compact enough for home or travel
Three sizes for different zipper widths
ONE SMALL ZIPPER PULL. MORE POSSIBILITIES.
Useful Around the House and on the Road
Keep a few wherever broken zipper pulls are most likely to become a problem—in your entryway, travel bag, camping kit, sewing drawer or car.
No stitching and no special experience required. Make sure the zipper slider and its attachment loop are still intact, then follow the steps below.
1
Unscrew
Loosen and remove the top screw cap.
2
Open
Open the detachable clip carefully.
3
Attach
Clip it onto the existing zipper slider loop.
4
Tighten
Secure the cap firmly, then pull smoothly.
THE RIGHT FIT MATTERS
Three Sizes for Common Everyday Zippers
Match the replacement to the width of your zipper. The three-size assortment helps cover slimmer clothing zippers through larger luggage and outdoor-gear zippers.
S
Small
For zipper widths of approximately 3–4.5 mm.
M
Medium
For zipper widths of approximately 5–7.9 mm.
L
Large
For zipper widths of approximately 8–10 mm.
i
Compatible zipper types
Designed for common metal, resin and nylon zippers. Measure the zipper width and inspect the slider loop before choosing a size.
CHOOSE YOUR SET
Keep the Right Size Within Reach
Choose a compact household set or stock up for travel bags, rental properties, repair drawers and family use.
STARTER SET
15 Pieces
5 small + 5 medium + 5 large
MORE TO KEEP & SHARE
30 Pieces
10 small + 10 medium + 10 large
VALUE SET
60 Pieces
20 small + 20 medium + 20 large
A PRACTICAL EVERYDAY ALTERNATIVE
Fix the Pull Without Starting a Sewing Project
When the zipper teeth, tape and slider are still working, replacing only the missing pull tab can be the simplest way to make the item convenient again.
Traditional Repair
Detachable Zipper Pull
May require sewing or tools
No sewing or special tools
Can take more time
Attaches in a few simple steps
Often fixed in one position
Removable and repositionable
Extra supplies may be needed
Ready to attach from the set
CHECK BEFORE ORDERING
Is This the Right Repair for Your Zipper?
✓ It can help when…
The pull tab is missing or broken.
The zipper slider still moves along the teeth.
The slider has an intact loop for attaching the clip.
The zipper teeth and surrounding fabric are still in usable condition.
× It will not repair…
Missing, bent or severely damaged zipper teeth.
A cracked or completely missing zipper slider.
Torn zipper tape or ripped surrounding fabric.
A zipper that separates because its slider is worn out.
BEFORE YOU CHOOSE YOUR SET
Quick Questions
Clear answers to the questions customers ask most.
Will these fit my zipper?
The set includes small, medium and large options for common zipper widths of approximately 3–10 mm. Measure your zipper and compare it with the size guide before attaching.
Does this replace the entire zipper slider?
No. This product replaces the missing or broken pull tab that you hold. The original zipper slider and its attachment loop need to remain intact.
Do I need tools, glue or sewing?
No sewing or glue is required. Unscrew the cap, open the clip, attach it to the slider loop and tighten the cap securely.
Which zipper types are compatible?
They are designed for many common metal, resin and nylon zippers on clothing, bags, luggage and outdoor gear. Fit depends on the zipper width and the condition of its slider loop.
Can I remove or reposition the pull?
Yes. The clip can be opened again for removal or repositioning. Tighten the screw cap firmly each time before using the zipper.
What is included in each set?
The 15-piece set includes 5 of each size, the 30-piece set includes 10 of each size, and the 60-piece set includes 20 of each size. Confirm your selected option before checkout.
Why does my zipper still separate after I attach it?
If the teeth separate behind the slider, the problem is usually the zipper slider or teeth—not the pull tab. This detachable pull adds a new handle but cannot correct a worn slider or damaged zipper chain.
FIX MORE. REPLACE LESS.
Keep a Quick Zipper Fix Within Reach
Choose your set and be ready the next time a jacket, backpack or suitcase loses its pull tab.
Returns you to the product options above.
Ο ορισμός μιας επιλογής έχει ως αποτέλεσμα την πλήρη ανανέωση της σελίδας.
